R01SPLHSL SPL Hdmi Utp Splitter Poc Newmar Winnebago Connexx

Review SPL Hdmi 1x4 Utp Splitter Poc Oem Newmar Winnebago Riverpark Connex

The SPL R01SPL-HSL HDMI 1x4 UTP Splitter from POC Newmar Winnebago is a versatile and high-performance solution for distributing HDMI signals to multiple devices. This splitter uses Unshielded Twisted Pair (UTP) cabling, making it an ideal choice for RV and marine environments where traditional HDMI cables may be susceptible to interference.

Measuring just 1.2 inches by 1.6 inches by 0.4 inches, the SPL R01SPL-HSL is compact and can easily be installed in confined spaces. The HDMI input is located at the center of the unit, while the four HDMI outputs are evenly spaced around the periphery. Each output supports a resolution of up to 1080p at 60Hz, ensuring crisp and clear visuals for all connected devices.

The SPL R01SPL-HSL is designed with a low profile to blend seamlessly into your RV or marine setup. Its durable aluminum housing provides excellent heat dissipation and protection against moisture and other harsh environmental conditions. Additionally, the splitter comes with a built-in power over Ethernet (PoE) injector, allowing it to be powered through the same Ethernet cable used for data transmission.

This HDMI splitter is compatible with a wide range of devices, including smartphones, tablets, laptops, gaming consoles, and televisions. It supports HDCP (High-bandwidth Digital Content Protection), ensuring secure transmission of copyrighted content. The SPL R01SPL-HSL also features automatic source detection, allowing it to automatically switch to the input source that is currently active.

In summary, the SPL R01SPL-HSL HDMI 1x4 UTP Splitter from POC Newmar Winnebago is a compact, durable, and high-performance solution for distributing HDMI signals to multiple devices in RV and marine environments. Its use of UTP cabling, low profile design, and built-in PoE injector make it a versatile and convenient choice for RVers and boaters alike.

A HDMI 1x4 UTP Splitter, model R01SPL-HSL, is a device used to distribute a single HDMI input signal to four separate HDMI output signals over Unshielded Twisted Pair (UTP) Ethernet cables. This can be particularly useful in RV applications, such as those using Newmar Winnebago's Riverpark Connexx system. Here are some potential pros and cons of buying this device:

1. Increases flexibility: A HDMI 1x4 UTP Splitter allows you to connect multiple displays to a single HDMI-enabled source, such as a satellite receiver or a Blu-ray player.

2. Longer cable runs: UTP cables can be used to extend HDMI signals further than standard HDMI cables. This can be especially useful in RV applications where long cable runs are common.

3. Reduces clutter: Instead of having multiple HDMI cables running from each source to each display, a single UTP cable can carry the HDMI signal to all four displays.

4. Cost-effective: A HDMI 1x4 UTP Splitter is generally less expensive than purchasing individual HDMI switches or buying multiple HDMI cables.

1. Potential signal degradation: Long cable runs over UTP cables can result in signal degradation, leading to decreased video quality or even signal loss.

2. Requires power: Some HDMI 1x4 UTP Splitters require external power sources, which can add complexity and cost to the setup.

3. Compatibility issues: Not all HDMI sources and displays are compatible with HDMI over UTP solutions. It's important to check the specifications of both the source and the displays to ensure compatibility.

4. Limited bandwidth: HDMI over UTP solutions may not support the highest available HDMI bandwidths, which can limit the video quality you can achieve.

A HDMI 1x4 UTP Splitter, such as the R01SPL-HSL, can be a useful device for RV applications where multiple displays need to be connected to a single HDMI source. However, it's important to consider the potential cons, such as signal degradation, compatibility issues, and limited bandwidth, before making a purchase. If you have relatively short cable runs and are confident in the compatibility of your source and displays, a HDMI 1x4 UTP Splitter could be a cost-effective and flexible solution for your RV setup. If you have longer cable runs or require higher bandwidth, you may want to consider other options, such as HDMI extenders or fiber optic HDMI solutions. Ultimately, the decision depends on your specific requirements and budget.

Details:

Often used in newmar and winnebago motor homes original av systems. This is an oem riverpark connex part not aftermarket, recommend for any replacement in your RV. New open box, see pics. With its compact design and built-in power over cable function, this Splitter is a reliable efficient solution for enhancing your multimedia experience on the road.

The Splitter allows for the distribution of hdmi signals to multiple screens, offering convenience and ease setup. The hdmi 1x4 utp Splitter with poc is an oem product by newmar specifically designed for use in RVs like winnebago and riverpark.

specifications vcinterconnects:

• brand: Spl
• mpn: R01splhsl
• type: Splitter

returns vcinterconnects:

• policy: no returns

payments vcinterconnects:

• credit card: diners-club
• other
• wallet: apple-pay

seller vcinterconnects:

• city: brownsville, oregon
• # reviews: 688
• rating: 100.0%

general vcinterconnects:

• category: Electronics > Tv, Audio > Accessories > Video Cables Interconnects

shipping vcinterconnects:

• service: usps ground advantage
• carrier: usps
• transit: 3-8 days
• type: fixed
• class: standard

offer vcinterconnects:

• in stock #: 5
• sold #: 12
• availability: in stock
• started: january 26, 2026
• prices: $19.36–$84.96
• item condition:
  • New
  • Used
  • Open box
  • Brand New
• options: ship-to-home